|
|
Build Your Online Product Catalogs?
| Product Name: |
manual silicone rubber
|
| Supply Ability: |
|
| Related proudcts |
rtv silicone rubber, manual silicone, |
| Specifications |
liquid, different colors are available, flowable |
| Price Term: |
FOB |
| Port of loading: |
shenzhen |
| Minimum Order |
200KG |
| Unit Price: |
4.8~7.5 |
|
Applications of manual mold silicone rubber
Manual mold design silicone rubber is mainly applicable to manual mold design of manual mold, PVC plastic molds, cement product molds, low melting point alloy molds, alloy toy craftworks, plastic toys craftworks, gifts and stationery, duplication of large statues and cultural relics, shoe sole mold fabrication, pad printing allocation, antivibration of electronic equipments etc.
Features of manual mold silicone rubber
Manual mold silicon rubber has the features of good elasticity, non-deformation, high temperature resistance, good tensile strength and low shrinkage. The reproduction times are ***ermined by the requirements of customers.
Operations of manual mold silicone rubber
Firstly, prepare the model mold or the product to be duplicated, take certain amount of silicon rubber, add 2-3% solid curing agent, and mix evenly. Then the mixed silicone rubber is ready for use. One mold can be solidified and formed in 2-3 hours.
(Note: our co***ny does not recommend you to add silicon oil. If a special soft silicon mold or fine ***ailed and complex patterns products are required, 5%-10% silicon oil can be added to soften the mold for easy demolding.)
Frequently asked questions for Silicon rubber for manual mold
What should we do when the air bubbles appeared in the process of mold making ?
To handle this situation depends on different cases. Under the condition of an available vacuum pumping machine, mix the silicon rubber and curing agent evenly and then take it to vacuum chamber to deair. If without a vacuum pumping machine, reduce the amount of the curing agent properly. For example, change the mixing ratio of the silicon rubber and the curing agent from former 4% to 1%-2%. In this way, the pre-crosslinking time of silicon rubber will slow down, so the air in the mold will be eliminated gradually to reduce the air bubbles.
Any questions, please feel free to contact Carol :
TEL: 0086-755-89948006
FAX: 0086-755-89948030
Mobileļ¼?086-13427963991
Websi |
| Company: |
Shenzhen Hong Ye Jie Technology Co., Ltd.
|
| Contact: |
Ms. carol cao |
| Address: |
pingdi street |
| Postcode: |
518117 |
| Tel: |
86-0755-89948006 |
| Fax: |
86-0755-89948030 |
| E-mail: |
|
|
|
|
Home
